Easy assembly, overall good quality. Little bit flimsy when moving about but once in position it’s sturdy and looks good. For the money I can’t complain at all. Instructions were minimal but still easy enough to work out how to assemble. Would buy again if I need for shelving for the garage/workshop
Read more

I bought this for shed storage. It arrived flat packed. Worthwhile counting all the metal pieces and separating them into piles before assembly. The small parts look similar. The instruction card is not very detailed. The key point to note is the placement of the metal end tabs into the frame. Some of the tabs need a very slight adjustment / bend. Very easy to do. Line them up then tap them down with the palm of your hand. Make sure they are both seated in the hole correctly. The metal middle support bars are fitted via the metal tabs through the hole then you need a flat edge screwdriver to bend them back, this adds rigidity to the entire frame. Tip - don’t bend the tabs on these bars until you’ve selected your shelve height. Otherwise you’ll double the assembly time and risk snapping the tabs. Took me 30 minutes. Once built it’s a sturdy shelving unit. The plastic feet were easy to attach, whereas the top plastic caps were awkward because I had the top shelf at the highest position. Worth dropping it down one level. Very happy with the rigidity and size. The MDF board is very thin but seems firm. I suspect it will bend or bow if you don’t displace the load/weight and it won’t last long if it gets wet. It’s great value for money. Ideal for the shed. It holds power tools, chain saw, tool box without any problems. I’ve screwed the frame to the shed to prevent it toppling over.
Read more

Very sturdy shelving unit, assembly takes about 10 minutes and is straight forward, there are no nuts and bolts it's all just clip fittings. Definitely would recommend.
Read more

I have purchased 6 of these now and they work very well. After the first one they become easy to assemble and once built are very secure but still light and easy to move.
Read more

Honestly, this is just the cheapest, crappest shelving I've ever seen. The problem you'll have is all the sellers re-sell the same products so avoiding this item means you might just end up with the same shelving. I bought some other shelving last year and that was fantasic and not much more expensive. Problems: simply the lugs you put into the slots just want to pop out all the time, no matter how much you put them in or use a mallet. It's like whack-a-mole - knock one in, the other pops out. They 'kind' of made it properly with the bracket that joins the two halves together because it has a small bulge that makes it really tight connection. Next problem is the centre brace just wants to slide out, so ignore what it says and do this: fold both lugs past 90 degrees then slide in. Because they are bent more than 90 it leaves a little gap for you to get your blade/screwdriver and bend the lug as far as you can so it cannot slide out Next problem, it comes with two instructions, one is the black and white 'international' version with no words and the pictures are useless, hence second colour instruction in English. The problem is you may as well ignore this and do it yourself because you will never do it right following their instructions, i.e. you need to be happy doing it all yourself (but it's not hard). Next problem, is getting it to the destination. If you built it in situ all is well, but otherwise, you carry it, but it twists because the metal is so thin and cheap and as mentioned the lugs do not fit tightly enough, so by the time you get it there you'll be lucky it is in one place. Then when it is in place you need your mallet to hit them all again back into place. I haven't used them yet, but I'm keeping them, I do not have much hope of it taking too much weight or not tipping over. Perhaps the best way to avoid getting this model is to look at the weight and any other sellers with the same weight you can presume it's the same one they're all selling.
Read more

Easy assembled with a rubber mallet just to drive the fitting tabs home. When built they are robust and the chrome looks stylish. R Florrie got an awful lot of stuff on it. Would recommend.
Read more

For the price it does the job, I bought it to store random things from my shed, but die to the flimsy mdf and not too confident it can hold any real weight, I've used it for more lighter things, assembly was easy to do on your own, frame work is ok, let down by mdf, any type of moisture etc would render this useless as mdf would distort. I wouldn't buy again for my exact needs I originally bought it for but I now use it for different items and works ok
Read more

Value for money. Fits ok. Big storage capacity but not for heavy stuff. Quality is not the best but first that money didnt expect much. I changed the boards to thicker ones so that they wouldn't bend under the weight. Definitely great for my garage stuff as everything have own space now and is easy to find it.
Read more