Feidak 150cm x 70cm x 30cm 5 Tier Shelf, Steel & MDF Boltless Shelves, 875kg Total Capacity/175kg Per Shelf Garage shed Storage Shelving Units, 3 Year Warranty (Black)

Great shelves. Easy to assemble, functional and sturdy. Well built and when individual shelf is varnished, they won’t get mould on them if placed in a garage. Blue also looks stylish.
Read more

Good sturdy shelves for the price and easy assembly
Read more

Sturdy shelves once built up The sections join with tab to slot connections. I had to bend the tabs a little on some to ensure they aligned to fit into slots. Easy to make them up with a hammer - I didn't have a rubber hammer as recommended so just used a normal one and a folded duster to protect. The shelving boards are like thick cardboard mdf type and will hold a reasonable amount well. They seem sturdy enough These fit into my understairs cupboard and provide extra storage space. Pleased at their value - they are better quality than those currently available in B&M for a better price
Read more

TOP TIP - IF YOU HAVE NO RUBBER MALLET USE A SMALL PIECE OF WOOD. I had no rubber mallet so used a small piece of 1 by 2 wood which I placed on the metal shelving before whacking into place with a hammer. If you do this on a rug/carpet you'll put most of it together on your own. You make two separate parts and then attach them together by the metal clips provided. You can actually have two small units although you'd need 8 more plastic guards for the top. When attaching the two separate shelving units you will need an extra hand. It is possible to do this on your own if your strong enough to hold the weight but be careful. From time to time the metal clips might slip through to the outside. If this happens, you can easily pull/push the clip back through by using a small piece of wood then hitting it with an hammer. You can then use the wood to bend the clip so that it passes through the middle of the slot and is secure. Do NOT assume you can allow some of the clips to just rest on the outside, this will snap the clips and the shelving will collapse. Once the unit is together and ALL clips are neatly connected into place, the shelving unit is fantastic and although 175 kg is possible, you'd need stronger MDF to prevent sagging. You will not be buying this to hold car engines but it will take a small fishtank and obviously even bigger lizard and reptile tanks. Whatever you use them for you will tidy things up and actually be able to find things and be more productive. Fantastic for any hobbyists. A place for everything and everything in its place. Second unit I have purchased and latest one put together in 20 mins. (first one took a few hours) The galvanised units are just as good but tend to get dusty and need polishing. The coloured units look great, good enough for living rooms, bedrooms and obviously garages and sheds. Because the shelves are adjustable you can can custom build it to suit your needs. The paint job really is a good one. I was surprised at the quality. One other tip, when you attach the two separate parts together you use 4 metal clips which secure the two shelving units together. IF your clip goes on the outside, you can use a small screw driver to hold the metal clip in the bottom shelving unit. Otherwise it might slip and you might get a bit too bossy with that kitchen paper covered hammer. I told you to use a small piece of wood! All in all the shelving units are cleverly designed and even if your DIY skills are pretty poor you'll get it up eventually and whether it takes 30 mins or half the day, use some wood to cushion the blow. If you have a rubber mallet, congratulations, your already ahead of the game as most of us have no rubber mallet. I suspect those who snap the actual clips on this are using way too much force. One last tip, you will have five pieces of metal which fit in the middle of the shelving units to secure the MDF shelves. This needs the small protruding metal clip at the end pushed over to 45 degrees. This enables it to slot into place using the slots provided. As always, make sure those clips pass through the centre of the slot and do not protrude on the outside. Tools needed: Hammer, small piece of wood, small screwdriver (to rebend clips if needs arise) and a few cups of tea. Patience also. Gloves would help but I never used any. Holes on the top of the shelving unit so you can secure the unit to the wall. This might be a good idea if you have kids around. Rugrats soon learn how to climb and obviously, any weight up there could topple down. Secure if there is any chance a child might stray.
Read more

Easy to put together and does the job.
Read more

They are very sturdy when put together. But putting them together could very well cause ww3. They are not easy. The shelving is a bit thin but for the price they are fine if you can stand the language coming from the construction staff ha!ha!
Read more

Strong sturdy unit
Read more

It is easy to put together, but the actual shelves are quite thin and I would not be putting very heavy items on them. It's fine for what I want and I can easily go to Jewsons to get replacement ones cut. Just be aware that if you want to hold heavy items , cat battery type things this is not the unit for you.
Read more

Falsche Maße
Read more

Ich würde die Regale (habe 2 gekauft) selbst nicht mehr bestellen. Der Aufbau hat sich trotz 2 Personen und Erfahrung als sehr kompliziert gestaltet. Die verschiedenen Elemente ließen sich nur sehr schwer miteinander verbinden. Ohne Handschuhe und Gummihammer nicht zu empfehlen. Wahrscheinlich stimmt das Preis-/Leistungsverhältnis. Nächstes Mal nehme ich einfach mehr Geld in die Hand. Für die Garage sind die Regale in Ordnung, obwohl ich mir mehr Stabilität gewünscht hätte.
Read more

Buena estanteria,fácil de montar y queda Bonita, yo la he puesto en la despensa de la cocina y va perfecta.
Read more